Dekoni Elite Velour Earpads for Sennheiser HD800: Upgrade Guide

By Addicted To Audio - Home Audio Electronics & Accessories | Published: 2026-10-26

Category: How-to Guides

Step-by-step instructions to replace your Sennheiser HD800 or HD800S earpads with Dekoni Elite Velour pads for improved comfort and soundstage.

Quick answer

Swap your stock Sennheiser HD800 or HD800S earpads for Dekoni Elite Velour pads to improve isolation and refine soundstage without changing the headphone's character.

Why upgrade the earpads on an HD800?

The Sennheiser HD800 and HD800S are already a gold standard in high-end audiophile listening. But their stock pads can compress over time, reducing comfort and seal. Dekoni Audio designed the Elite Velour earpads to add improved isolation and a slightly wider soundstage while preserving the headphone's open, airy signature. The velour material also feels cooler against the skin during long sessions.

What to know before you start

The Dekoni Elite Velour pads are a direct replacement for the HD800 and HD800S. No tools are required, but you'll need a clean, well-lit workspace. The stock pads are held on by a plastic ring that twists into place; the Dekoni pads use the same mechanism. Be careful not to scratch the plastic housing or stretch the new pad fabric.

Step-by-step installation guide

Remove the old earpad: Hold the headphone firmly with one hand. With the other, grip the edge of the stock pad and rotate it counterclockwise until it unclips from the plastic mounting ring. Lift the pad away from the housing. Common mistake: twisting too hard can crack the plastic ring. If it resists, check that you're turning in the correct direction.
Clean the mounting surface: Wipe the exposed plastic ring and the headphone housing with a dry microfiber cloth to remove dust or oils. Do not use liquids or solvents. Any debris left behind can cause the new pad to seat unevenly.
Align the new Dekoni Elite Velour pad: Position the pad so the Dekoni logo is oriented the same way as the original pad (typically at the bottom or rear). Press the pad's plastic ring onto the headphone's mounting ring, then rotate it clockwise until it clicks into place. Ensure the pad is fully seated all around. If the pad feels loose or tilts, remove it and realign before twisting further. A partial lock will affect sound isolation.
Repeat for the other side: Follow the same steps for the second earpad. Check that both pads are mounted symmetrically and that the foam is not bunched or folded. Uneven pad installation can shift the headphone's frequency response and imaging.

Product facts

Dekoni Audio Elite Velour Earpads for Sennheiser HD800 Series: Dekoni Audio spent a lot of time designing and refining this ear pad to be the most comfortable and acoustically transparent upgrade for the HD800 series. This means the velour pads are engineered to maintain the HD800's signature sound while offering a more plush, breathable feel and better isolation than the stock pads.
Dekoni Audio Elite Velour Earpads for Sennheiser HD800 Series