Thorens TD 403 DD Manual Turntable

Direct Drive Turntable TD 403 DD
With the new model TD 403 DD Thorens completes the line of direct drive plug-and-play turntables of the 400 series. Visually a true Thorens, the new TD 403 DD features the same proven smooth-running direct drive as the successful TD 402 DD, but sets itself apart from its smaller brother with a more massive 1.4 kg and 22mm-thick cast aluminum platter and the TP 150 audiophile tonearm also used in the new TD 1500 model. A high-quality and pre-adjusted 2M Blue cartridge from Danish cartridge specialist Ortofon is also supplied as standard. This proves to be an adequate playing partner due to its naked diamond with elliptical stylus.

The purist and audiophile claim of the new model is emphasised by the omission of an auto stop function and integrated phono preamplifier. The new turntable is powered by a 24V power supply

Thorens TP 150 Tonearm
The new TP 150 tonearm is also used on the newly introduced Thorens TD 1500 model and is similar to the TP 124 used on the new TD 124 DD. It has an effective mass of 14 grams, is adjustable in height and azimuth and is equipped with a standard SME connector, so headshells can easily be switched or other cartridges mounted. The anti-skating is set by a sliding weight in the base of the arm, which is adjusted on a nylon thread guided over a ruby bearing. This guarantees the smoothest possible operation. The contact force is set classically on the scaled and two-part counterweight. This allows a wide selection of pickups to be used, from 6 - 30 grams weight.

With the new TD 403 DD, Thorens rounds up its range of direct-drive turntables that are practically ready to play right out of the box. The Thorens TD 403 DD will be available in walnut or black, both in high gloss, from November 2021 in stores. A cover, as well as an RCA cable are included in the scope of delivery.