What the Diva II Mk2 gives you before you lift a finger
The AVID HIFI Diva II Mk2 is a belt-drive turntable built around a one-piece aluminium chassis. AVID describes it as the company’s original entry-level model, sharing design elements with its more expensive decks rather than being a stripped-down cost exercise. That matters for setup because the deck’s foundation is a rigid casting, not a sprung subchassis, so most of your first-play work is about giving that rigid base a stable, low-vibration home.
The supplied catalog also confirms a precision-machined aluminium platter with a composite cork mat, a sapphire bearing and clamping system for the arm and platter, an external power supply with a purpose-designed mains transformer, and a triple elastomer isolation system using a tailored sorbothane compound. The deck is available with a TA-3 tonearm option. The catalog does not list cartridge, belt, feet or cable details, so this guide sticks to what is confirmed and flags where you need the manual or your dealer.
Catalog facts that shape the setup
- AVID HIFI Diva II Mk2 Turntable: The foundation is an ultra-rigid, one-piece aluminium casting, with the arm and platter mounted using a sapphire bearing and tight clamping system. A rigid one-piece chassis behaves differently from a suspended deck: you are not tuning spring bounce, you are making sure the casting sits flat and stays coupled to a stable surface.

AVID HIFI Diva II Mk2 Turntable - AVID HIFI Diva II Mk2 Turntable: The platter is precision-machined aluminium with a composite cork mat, and the deck uses a clamp to reduce unwanted vibrations entering the platter. The mat and clamp are part of the playing interface, so fit them as supplied before you judge the sound or start swapping mats.
- AVID HIFI Diva II Mk2 Turntable: AVID employs a triple elastomer layer system using a tailored sorbothane compound for mechanical isolation of the playing surface. The deck already includes isolation in its design; your job is to place it on a sensible support rather than adding random extra squishy layers that may work against it.
- AVID HIFI Diva II Mk2 Turntable: The Diva II has an external power supply with a purpose-designed mains transformer and electronics to produce smooth, consistent rotational force. The power supply is a separate box, so plan for where it sits and how its cable reaches the deck without pulling on the chassis.
A first-play sequence you can follow in one sitting
These steps cover the parts of setup the supplied information supports. They do not replace the manufacturer’s manual for belt fitting, cartridge installation or bearing care, which are not confirmed in the catalog.
- 1. Choose a level, rigid support: Put the deck on a shelf or stand that does not rock and is out of direct sunlight and heavy footfall. The Diva II’s one-piece aluminium casting and triple elastomer isolation are designed to manage vibration, but they work best when the surface underneath is solid and level. Check level with a spirit level on the platter or chassis edge, then adjust the support rather than forcing the deck.
- 2. Place the external power supply thoughtfully: The power supply is a separate unit. Keep it on a stable surface where its cable reaches the deck with slack, so the cable does not tug on the chassis or lift a corner. Avoid stacking it directly on the platter or tonearm area.
- 3. Fit the platter and mat as supplied: The catalog confirms a machined aluminium platter and composite cork mat. Seat the platter fully on its bearing arrangement as described in the manual, then lay the cork mat flat. Do not add a second mat before first play; the supplied combination is the reference point.
- 4. Check the clamp and record interface: The clamp is intended to help reduce vibrations entering the platter. Fit it according to the manual and make sure it sits square on the record. If the clamp feels tight or the record does not sit flat, stop and check the manual rather than forcing it.
- 5. Confirm the tonearm option and cartridge: The deck is offered with a TA-3 tonearm. Cartridge choice and alignment are not confirmed in the supplied information, so use the tonearm and cartridge manuals for overhang, tracking force and alignment. Do not guess these settings from this guide.
- 6. Set rotational speed and let the belt settle: The external power supply is designed to feed the motor for smooth, consistent rotation. Before first play, run the platter for a short period and confirm the belt is seated and the speed is stable. Belt routing and speed adjustment details are not in the catalog, so follow the manual.
- 7. Do a first-play listen with a record you know: Start with a clean record you know well. Listen for obvious mechanical noises, a wobbling platter or a tonearm that drifts. If something sounds wrong, stop and check the setup rather than adjusting multiple things at once.
Isolation and feet: what to do, and what not to assume
The Diva II Mk2 already uses a triple elastomer isolation system with a tailored sorbothane compound. That does not mean placement is irrelevant. It means the deck is designed to isolate the playing surface when it sits on a sensible support. Start with a rigid, level shelf or stand and the deck’s own feet or supplied isolation arrangement. If you are tempted to add aftermarket feet or a thick isolation platform, change one thing at a time and listen for whether the deck still sits level and stable.
The catalog does not specify foot height, thread size or a recommended shelf material, so there is no honest way to give you a precise placement distance or a torque figure. Treat any such number you see elsewhere as unconfirmed for this deck. Your practical checkpoints are simple: the deck does not rock, the platter is level, the power-supply cable has slack, and the tonearm moves freely without scraping.
What the catalog confirms versus what you must check yourself
Use this table to separate the facts you can rely on from the setup details that need the manual or your dealer.
- Confirmed in the supplied catalog: One-piece aluminium casting; sapphire bearing and clamping system for arm and platter; machined aluminium platter with composite cork mat; triple elastomer isolation using sorbothane; external power supply with purpose-designed mains transformer; TA-3 tonearm option; older versions can be upgraded.
- Not confirmed in the supplied catalog: Cartridge model or alignment figures; belt routing and replacement interval; recommended tracking force; foot thread or height; exact cable lengths; speed calibration procedure; care instructions for the bearing or mat. Check the manual or ask your dealer before acting on these.
The honest trade-off before you buy
The Diva II Mk2 is a rigid, well-founded belt-drive deck with an external power supply and a platter/clamp system aimed at controlling vibration. That design rewards a solid support and a careful first setup. The trade-off is that it is not a plug-and-play all-in-one: you need to choose a tonearm and cartridge, and the catalog does not supply cartridge alignment or belt-fitting instructions. If you want a deck that arrives fully configured with a cartridge, budget for dealer fitting or be prepared to follow the tonearm and cartridge manuals closely.
The catalog price is USD 3815.28 against a comparison price of USD 5299.00, but price is not the reason to choose it. Choose it if you want a rigid, upgradeable AVID design and are willing to give it a stable, level home. If you need confirmed cartridge alignment data before you buy, ask your dealer to supply it rather than relying on generic guides.

